Calibration of SO2 and NO2 Electrochemical Sensors via a Training and Testing Method in an Industrial Coastal Environment
Low-cost sensors can provide inaccurate data as temperature and humidity affect sensoraccuracy. Therefore, calibration and data correction are essential to obtain reliable measurements.This article presents a training and testing method used to calibrate a sensor module assembledfrom SO2 and NO2 electrochemical sensors (Alphasense B4 and B43F) alongside air temperature (T)and humidity (RH) sensors.
Field training and testing were conducted in the industrialized coastalarea of Quintero Bay, Chile. The raw responses of the electrochemical (mV) and T-RH sensors weresubjected to multiple linear regression (MLR) using three data segments, based on either voltage(SO2 sensor) or temperature (NO2). The resulting MLR equations were used to estimate the referenceconcentration. In the field test, calibration improved the performance of the sensors after addingT and RH in a linear model.
The most robust models for NO2 were associated with data collectedat T < 10 C (R2 = 0.85), while SO2 robust models (R2 = 0.97) were associated with data segmentscontaining higher voltages. Overall, this training and testing method reduced the bias due to T andHR in the evaluated sensors and could be replicated in similar environments to correct raw data fromlow-cost electrochemical sensors. A calibration method based on training and sensor testing afterrelocation is presented. The results show that the SO2 sensor performed better when modeled fordifferent segments of voltage data, and the NO2 sensor model performed better when calibrated fordifferent temperature data segments.